100 meters obstacle race

This race is 100 m long. The barrier is situated 23 meters from the starting post. The barrier is 2 meters high. Behind the barrier the competitor fixes two hoses-C (which corresponds to the actual rules). The balance beams upper edge begins 10 meters behind hoses. The balance beam is 8 meters long, 18 cm wide and 1,2 m high. The place for the locating the distributor is 25 m before finish.

After the startup the competitor gets over the barrier, catches the hose and rolls out it before, on and behind the balance beam. Crosses the balance beam and jumps over it (to the own line). Then the racer connects hoses. The first conveyor connects to the distributor and the second one connects to the pipe and then runs to the finish.

Scale with hook ladder

The training tower has got 4 floors and is from the metal construction its anterior face is veneered by the deals. In the second, third, fourth etage are situated windows with parapets. The minimal tolerable weigh of the hook ladder is 8,5 kg.

The competitors begin the race at the scratch and hold the hook ladder. After the start they run to the training tower (32,25 meters far away from the start) and hang the hook ladder to the windows parapet which is at the second floor. Then the competitor ladders up and sits to the parapet. Take the hook ladder and hangs it to the 3. etage, ladders up and sits on the parapet again. At the end hangs the hook ladder to the fourth etage and ladders up. The race ends if the racer touches the 4. floor of the training tower.

Obstacle relay race

This race is running in two lines at the same time. Every racing course is divided into 4 separated sectors. In the first section is situated house which is about 30 m from the start. The second section contains the barrier which is 2 meters high. To the third section the racer puts two collared hoses C.

10 meters behind the hoses begins upper edge of the balance beam and at the distance about 225 meters from the start the racer puts there the distributor. There are portable extinguisher and the basin with flammable fluids. The racer in the first section has got pipes (as the relay stick) and also has the ladder for the overcoming the house. The racer takes the ladder and go with it to the start. After the start the racer overcomes the house and touches the flat of this house and then jumps down to his own race course. In the case the pipe falls down the racer who delivers it has to pick up it.

The competitor of the second section overcomes the barrier and deliver the pipes to the other raceer from the third section. This racer takes the hoses and unrolls its before, on and behind the balance beam and jump down from it to his own race course. Then joins hoses. The first conveyor connects to the distributor and the second one connects with pipes. The connection of it has to be clear. Then this racer disconnects this and delivers the pipe to the last racer. The fourth racer takes portable extinguisher and extinguishes the burning fluid in the basin. Then the racer puts the extinguisher next to the basin (extinguisher musnt touch the basin) and runs to the finish.

Fire fighting attack

This discipline is the most similar to the real works during the fire fighting attack. The team is build up from the 7 members. Before the fire fighting attack the team has to preparate the special equipment:

• portable pump
• 3 hoses B
• 4 hoses C
• distributor
• 2 pipes
• 2 suctions hoses and 1 suction head

The water source is situated 4 meters from the base. There are 2 targets which are situated about 90 meters from the central line of the base. The team has to get ready the motor fire pump and the special equipment for the fire fighting attack. After the command of the referee the team has got 5 minutes for the situating all necessary equipment to the base for the initiating the fire fighting attack.No equipment has to over reach the base and no equipment has tot ouch the ground (including of suctions hoses). After the start the team runs out from the base and starts on the motor pump and srews on the suction head. The team begins to spout to targets. During the spouting no member of the team has to outsteps the spouting line. Pipes musnt bear on the ground or on the other member of the team.

The fire fighting attack ends after the signal from both targets. All works have to be done and finished to the 2 minutes after the start.